Multi-color plastic box injection moulding machine
Product details
1 LCD computer control with big display screen
2 Hydraulic proportional valve
3 Generous space for fitting large moulds
4 Two positon transducers to control clamping and injection
5 4-stage of injection speed, 3-stage of holding pressure, 4-stage
of metering phase can be setup according to products' requirement.
6 Optimal platen design, with toggle junction casting together with
platen improves rigidity of mechanical system hence improves
product dimensions accuracy
7 Screw and barrel are made of high quality new materials, which
extended the service life
8 Multiple hydraulic ejection
9 Differential area high speed clamping
10 All hydraulic components and seals are offered by famous
international manufacturers
11 Electrical safety interlock
Specification:
| | | GS1608HS |
A | B | C | D |
INJECTION UNIT | Screw Diameter | mm | 65 | 70 | 75 | 80 |
Screw L/D Ratio | L/D | 21.5 | 20 | 18.7 | 17.5 |
Shot Size(Theoretical) | cm3 | 1068 | 1239 | 1423 | 1619 |
Injection Weight | g | 972 | 1127 | 1295 | 1473 |
Injection Rate | g/s | 292 | 339 | 389 | 443 |
Plasticizing Capacity | g/s | 38.2 | 44.9 | 51.4 | 58.7 |
Injection Pressure | Mpa | 213 | 184 | 160 | 141 |
Screw Speed | rpm | 0-185 |
CLAMPING UNIT | Clamp Tonnage | KN | 3800 |
Toggle Stroke | mm | 700 |
Space Between Tie Bars | mm | 730*730 |
Max.Mould Height | mm | 730 |
Min.Mould Height | mm | 280 |
Ejector Stroke | mm | 180 |
Ejector Tonnage | KN | 110 |
Ejector Number | piece | 13 |
OTHERS | Max.Pump Pressure | Mpa | 17.5 |
Pump motor Power | KW | 37 |
Heater Power | KW | 24.85 |
Machine Dimension(L*W*H) | m | 7.36 x 1.96 x 2.15 |
Machine Weight | t | 15 |
Hopper Capacity | Kg | 50 |
Oil Tank Capacity | L | 750 |
Features
Injection speed up to 120 mm/s(high),product quality REpaetability ≤ 0.05 %(precision),the whole energy-saving level up to the national
standard,barrel heating energy saving 30~50%(energy);
Using high-performance screw barrel assembly;
Control system responds faster,higher sensitivity and
reproducibility,good stability,anti-interference ability,low power
consumption,the closed-loop control;
Maintenance is simple,low maintenance cost and long servise life;
GS-HS plastic injection machine of oil-electric compound system
control series is the product newly developed by Guangsu Company
with feature of economic benefits,energy saving,high response and
low noise.
Structure principle during actual working status,the system
directly feedbacks the pressure-flow rate singal through exit
pressure sensor of oil pump and cycloscope to the high speed servo
driver.The servo driver gives out electric signal to servo driving
motor and oil pump,allowing of corresponding change to pressure and
flow rate,therefore,theclosed clrcuit control of pressure and flow
rate is realized.
Delivery time:
45 days upon deposit and approval to the bottle drawing.
Guarantee:
We are response for one year warranty for the machine, however, it
without any human conduct. And provide one-year free spare part for
client. We will send engineer to client’s company to help
installing the machine, teaching their staff operating the machine
and also, we do have a private school which helping our client
sending their staff to china, help them training.
After sales service:
The buyer pays travel expenses, hotels, airfares, meals and ground
transportation and any other expenses related to installation and
training at customers’ facility.
Description:
We all do best try to make products perfect!
